Core Overview - 2.2 English

MIPI CSI-2 Transmitter Subsystem (PG260)

Document ID
PG260
Release Date
2023-05-16
Version
2.2 English

The MIPI CSI-2 TX subsystem allows you to quickly create systems based on the MIPI protocol. It interfaces between image sensors and an image sensor pipe. An internal high speed physical layer design, D-PHY, is provided that allows direct connection to MIPI based receivers. The top level customization parameters select the required hardware blocks needed to build the subsystem. This Figure shows the subsystem architecture.

Figure 1-1: Subsystem Architecture

X-Ref Target - Figure 1-1

X17904-PG_Subsystem.jpg

The subsystem consists of the following sub-cores:

MIPI D-PHY

MIPI CSI-2 TX Controller

AXI Crossbar