- Mixer Type
- Sets the type of Mixer to be used. Valid options are bypassed, coarse, and fine. Selectable options depend on the selection in the converter Analog Output Data field.
- Mixer Mode
- Sets the mixer mode of the selected converter within the selected tile. The parameter is only configurable when the converter is enabled. The choice of mixer modes depends on the selected Mixer Type and the format of the analog output data selected. When real data is output the mixer can be set to I/Q -> Real or Bypass and when I/Q data is output the mixer can be set to I/Q to I/Q.
- Coarse Mixer Frequency
- Sets the frequency of the coarse mixer. The parameter is configurable only when coarse is selected as the mixer type. Valid options are: Fs/2, Fs/4 and -Fs/4.
- Fine Mixer Frequency
- Sets the frequency of the fine mixer. This parameter is only available when fine is selected as the mixer type. The valid range of frequencies is -10 GHz to 10 GHz.
- Fine Mixer Phase
- Sets the phase of the fine mixer. The parameter is only available when fine is selected as the mixer type. Valid range is -180 to 180 degrees.