RF-DAC Converter Configuration - 2.6 English

Zynq UltraScale+ RFSoC RF Data Converter v2.6 Gen 1/2/3/DFE LogiCORE IP Product Guide (PG269)

Document ID
PG269
Release Date
2023-10-18
Version
2.6 English
Enable DAC
Select if the selected converter within the selected tile is enabled. Valid values are True and False.
Invert Q Output
When enabled, the Q output of the converter is inverted. This parameter is configurable only when I/Q output data is selected. A follow-on analog mixer must implement a subtraction, I x cos(f) - Q x sin(f) so the option to provide a -Q signal (negative quadrature) is provided so that the external mixer can perform the addition, I x cos(f) + (-Q)sin(f)
Inverse Sinc Filter
Select whether the inverse sinc filter is enabled or not. The parameter is only configurable when the converter is enabled. Valid values are TRUE and FALSE. This applies for both Nyquist zones, based on the Analog Settings > Nyquist Zone selection.
Enable TDD Real Time Ports (Gen 3 /DFE)
When enabled the tdd_mode port is added to the IP. This allows power savings to be made by powering down sections of the RF-DAC.