Address Map Options Tab - 1.0 English

AXI High Bandwidth Memory Controller LogiCORE IP Product Guide (PG276)

Document ID
PG276
Release Date
2022-11-02
Version
1.0 English

The following figure shows the Address Map Options tab for the HBM IP.

Figure 1. AXI HBM Customize IP – Address Map Options Tab
Custom Address Map
Check the Custom Address Map box if the default settings are not desired. You can define the mapping from the AXI addresses to HBM addresses. If this is not checked, then the default settings are assigned. If the Configure MCs to the Same Value options is set on the Configuration tab, then only MC0 is displayed and all MCs are set to this value. If that option is not set, then all the enabled MCs appear. Selecting a Custom Address Map is not compatible with all the re-ordering options in the Reordering tab.
Bank Group Interleave
Enables sequential address operations to alternate between even and odd bank groups to maximize memory efficiency. Random access patterns might not benefit from this setting.