SDI_TX_ANC_DS_IN Interface Signals - 2.0 English

PG289 SMPTE UHD-SDI TX Subsystem

Document ID
PG289
Release Date
2022-05-18
Version
2.0 English

These signals are available when the ANC Data Insertion I/F option is selected.

Table 2-11: SDI_TX_ANC_DS_IN Interface Signals

Signal

I/O

Description

SDI_TX_ANC_DS_IN_tx_ds1_anc_in[9:0]
to
SDI_TX_ANC_DS_IN_tx_ds8_anc_in [9:0]

I

SDI data stream from 1 to 8 after ancillary data insertion.

SDI_TX_ANC_DS_IN_tx_ds9_anc_in[9:0]
to
SDI_TX_ANC_DS_IN_tx_ds16_anc_in [9:0]

I

SDI data stream from 9 to 16 after ancillary data insertion. Enabled only when native SDI and12 SDI 16 DS option is selected.

sdi_tx_anc_ctrl_out[31:0]

O

Bit0: tx_sd_ce
Bit1: tx_ce
Bit12–Bit2: SDI line number
Bit13: SID TX IP internal reset
Bit16–Bit14: tx_mode
Bit19–Bit17: tx_mux_pattern
Bit31–Bit20: reserved