Verification, Compliance, and Interoperability - 2.0 English

PG289 SMPTE UHD-SDI TX Subsystem

Document ID
Release Date
2.0 English

Verification, Compliance, and Interoperability

The SMPTE UHD-SDI TX Subsystem has been verified on hardware testing.

A highly parameterizable transaction-based simulation test suite has been used to verify the subsystem. The tests include:

Different SDI standard.

Different resolutions with different video timing parameters.

Recovery from error conditions.

Register read and write access.

Hardware Testing

The SMPTE UHD-SDI TX Subsystem has been tested with standard off-the-shelf SDI test equipment and with a variety of preliminary UHD-SDI devices. It is compliant with the SMPTE SDI standards.

Hardware Validation

The SMPTE UHD-SDI TX Subsystem is tested in hardware for functionality, performance, and reliability using Xilinx® evaluation platforms. The SMPTE UHD-SDI TX Subsystem verification test suites for all possible modules are continuously being updated to increase test coverage across the range of possible parameters for each individual module.

The SMPTE UHD-SDI TX Subsystem has been validated using

Zynq® UltraScale+™ MPSoC ZCU106 Evaluation Kit

Kintex® UltraScale+ KCU116 Evaluation Kit

Versal® ACAP VCK190 Evaluation Kit

The SMPTE UHD-SDI TX Subsystem is tested with following devices:

Phabrix QX 12G as Source and Sync device

Phabrix R1000 as Source and Sync device

Phabrix SX as Source and Sync device

Omnitek Ultra 4K Tool box as Source and Sync device