Hardware Validation - 2.0 English

SMPTE UHD-SDI Receiver Subsystem Product Guide

Document ID
PG290
Release Date
2022-04-26
Version
2.0 English

The SMPTE UHD-SDI RX Subsystem is tested in hardware for functionality, performance, and reliability using Xilinx® evaluation platforms. The SMPTE UHD-SDI RX Subsystem verification test suites for all possible modules are continuously being updated to increase test coverage across the range of possible parameters for each individual module.

The SMPTE UHD-SDI RX Subsystem has been validated using

Zynq® UltraScale+™ MPSoC ZCU106 Evaluation Kit

Kintex® UltraScale+ KCU116 Evaluation Kit

Versal ACAP VCK190 Evaluation Kit v2.0 and ES v1.0

The SMPTE UHD-SDI RX Subsystem is tested with following devices:

Phabrix QX 12G as Source and Sync device

Phabrix R1000 as Source and Sync device

Phabrix SX as Source and Sync device

Omnitek Ultra 4K Tool box as Source and Sync device

Table A-1: Tested Configurations

Board

PLL Source

Sink Type

Model Number

Sink Firmware

Status

ZCU106 (GTH)

QPLL0/QPLL1

Phabrix

QX

ver 3.0

Pass

Omnitek

Ultra 4K

ver 4.0.74.0

Pass

Black Magic

Teranex Mini

NA

Pass

CPLL

Phabrix

QX

ver 3.0

Pass

Omnitek

Ultra 4K

ver 4.0.74.0

Pass

Black Magic

Teranex Mini

NA

Pass

KCU116 (GTY)

QPLL0/QPLL1

Phabrix

QX

ver 3.0

Pass

Omnitek

Ultra 4K

ver 4.0.74.0

Pass

Black Magic

Teranex Mini

NA

Pass

CPLL

Phabrix

QX

ver 3.0

Pass

Omnitek

Ultra 4K

ver 4.0.74.0

Pass

Black Magic

Teranex Mini

NA

Pass

VCK190(GTY)

LCPLL

Phabrix

QX

ver 3.0

Pass

RPLL

Phabrix

QX

ver 3.0

Pass