These ports are enabled when the Ancillary (ANC) Data Insertion I/F option is selected.
Table 2-10:
SDI_RX_ANC_DS_OUT Interface Port Descriptions
Signal
|
I/O
|
Description
|
SDI_RX_ANC_DS_OUT_ds1[9:0] to SDI_TX_ANC_DS_OUT_ds8[9:0]
|
O
|
SDI stream outputs from 1 to 8
|
SDI_RX_ANC_DS_OUT_ds9[9:0] to SDI_TX_ANC_DS_OUT_ds16[9:0]
|
O
|
SDI stream outputs from 9 to 16. Enabled only when 12 SDI 16 DS option is selected.
|
sdi_rx_anc_ctrl_out[31:0]
|
O
|
Bit 0: rx_ce_out
Bit 3: Bit1: rx_mode
Bit 7: Bit4: rx_t_family
Bit 8: rx_mode_locked
Bit 9: rx_t_locked
Bit 10 to 13: rx_t_rate
Bit 14: t_scan
Bit 15:
SMPTE UHD-SDI RX
IP internal reset
Bit 31:16: Reserved
Available only when ANC data Insertion I/F option is selected
|