Core Overview - 3.1 English

DisplayPort 1.4 TX Subsystem Product Guide
Document ID
PG299
Release Date
2022-10-19
Version
3.1 English

The DisplayPort 1.4 TX Subsystem is a feature-rich, hierarchically packaged subsystem with a DisplayPort (TX) core ready to use in applications that require a DisplayPort 1.4 compliant source.

The DisplayPort 1.4 TX Subsystem operates in the following video modes:

  • Single stream transport (SST)
  • Multi-stream transport (MST) up to 4 streams
Recommended: Xilinx® recommends a redriver such as the SN65DP141 along with the TX subsystem solution. Using a redriver can make compliance testing simpler; however, using a redriver is not required.

The following table shows the core support for UltraScale™ and UltraScale+™ families. For more information on the device constraint/dependency, see the Video PHY Controller LogiCORE IP Product Guide (PG230) and respective device family datasheets. Speed grade and temperature information can be found in the UltraScale Architecture and Product Data Sheet: Overview (DS890) and the Defense-Grade UltraScale Architecture Data Sheet: Overview (DS895).

Table 1. Core Support for UltraScale and UltraScale+ Devices
Device Family Device Data Sheet Speed Grade Neither MST (or) HDCP 1.x/2.x (or) eDP (or) DSC (or) YUV420 Enabled Either MST (or) HDCP 1.x/2.x (or) eDP (or) DSC (or) YUV420 Enabled
Kintex® UltraScale™ Kintex UltraScale FPGAs Data Sheet: DC and AC Switching Characteristics (DS892) -1 5.4 Gb/s 2.7 Gb/s
-2, -3 8.1 Gb/s 5.4 Gb/s
Virtex® UltraScale™ Virtex UltraScale FPGAs Data Sheet: DC and AC Switching Characteristics (DS893) -1 5.4 Gb/s 2.7 Gb/s
-2, -3 8.1 Gb/s 5.4 Gb/s
Artix® UltraScale+™ -1LI (VCCINT = 0.72 V) 2.7 Gb/s
-1I (VCCINT = 0.85 V) 5.4 Gb/s
-1LI (VCCINT = 0.85 V) 5.4 Gb/s
-1E (VCCINT = 0.85 V) 5.4 Gb/s
-1 5.4 Gb/s
-2, -2E, -2I 8.1 Gb/s
Kintex® UltraScale+™ Kintex UltraScale+ FPGAs Data Sheet: DC and AC Switching Characteristics (DS922) -1LI (VCCINT = 0.72 V) 2.7 Gb/s
-1LI (VCCINT = 0.85 V) 5.4 Gb/s
-2LE (VCCINT = 0.72 V) 5.4 Gb/s
-1, -1E, -1I, -1M, -1Q 5.4 Gb/s
-2, -2E, -2I, -3, -3E 8.1 Gb/s
Zynq® UltraScale+™ MPSoC Zynq UltraScale+ MPSoC Data Sheet: DC and AC Switching Characteristics (DS925) -1LI (VCCINT = 0.72 V) 2.7 Gb/s
-1LI (VCCINT = 0.85 V) 5.4 Gb/s
-2LE (VCCINT = 0.72 V) 5.4 Gb/s
-1, -1E, -1I, -1M, -1Q 5.4 Gb/s
-2, -2E, -2I, -3, -3E 8.1 Gb/s
Virtex® UltraScale+™ Virtex UltraScale+ FPGA Data Sheet: DC and AC Switching Characteristics (DS923) -1 (VCCINT = 0.85 V) 5.4 Gb/s
-2 (VCCINT = 0.72 V) 5.4 Gb/s
-2, -3 8.1 Gb/s
Zynq® UltraScale+™ RFSoC Zynq UltraScale+ RFSoC Data Sheet: DC and AC Switching Characteristics (DS926) -1LI (VCCINT = 0.72 V) 2.7 Gb/s
-1LI (VCCINT = 0.85 V) 5.4 Gb/s
-1, -1E, -1I, -1M 5.4 Gb/s
-2LE (VCCINT = 0.72 V) 5.4 Gb/s
-1 (VCCINT = 0.72 V) 5.4 Gb/s
-2 (VCCINT = 0.72 V) 5.4 Gb/s
-1 (VCCINT = 0.85 V) 5.4 Gb/s
-2, -2E, -2I 8.1 Gb/s

The following table shows the core support for Versal® devices.

Table 2. Core Support for Versal Devices
Device Device Data Sheet Speed Grade Neither MST (or) HDCP 1.x/2.x (or) eDP (or) DSC (or) YUV420 Enabled Either MST (or) HDCP 1.x/2.x (or) eDP (or) DSC (or) YUV420 Enabled
Versal® ACAP Versal Prime Series Data Sheet: DC and AC Switching Characteristics (DS956)

Versal AI Core Series Data Sheet: DC and AC Switching Characteristics (DS957)

All -1 speed grades and -2LP 5.4 Gb/s 2.7 Gb/s
All -2 speed grades except -2LP 8.1 Gb/s 5.4 Gb/s
All -3 speed grades 8.1 Gb/s