The AXI Parameters tab is shown below.
Figure 1. AXI Parameters Tab
- ID_WIDTH
- The ID width is automatically propagated from the master by default. This can be overridden by the user by using the switch in the GUI.
- ADDR_WIDTH
- The address width is automatically propagated from the master by default. This can be overridden by the user by using the switch in the GUI.
- AXI_WRAP_TRANS
- This indicates whether AXI4 wrap transactions are
allowed:
- 1 – Yes
- 0 – No
By default only AXI4 INCR transactions are supported. AXI4 FIXED transactions are never supported.