Inputs Tab - 1.0 English

Versal Adaptive SoC Programmable Network on Chip and Integrated Memory Controller 1.0 LogiCORE IP Product Guide (PG313)

Document ID
Release Date
1.0 English

The Inputs tab of the Customize IP dialog box is shown in the following figure. This tab allows the configuration of the input ports, associated clocks, and destination ID pins.

Figure 1. Inputs Tab

AXI Inputs
Set the number of AXI4-Stream inputs to this instance and configure each input. The configuration options of the Inputs tab are:
Connected To
From the programmable logic fabric.
From the AI Engine array.
TDATA Width (bytes)
Specify the width of the TDATA signal
Inter-NoC Inputs
Set the number of INI input ports to this NoC.
You can optionally set the INI Connection Strategy as follows:
Allows IP integrator to determine the correct strategy. This is the default.
Single Driver
Has a single driver and possibly multiple loads.
Single Load
Has a single load and possibly multiple drivers.