The following Tcl commands are available from the Vivado Tcl Console when connected to the hardware in Hardware Manager.
-
get_hw_ddrmcs - This command returns a list of all the integrated memory controllers. Use this command with ‘lindex’ to select an item in the list.
-
refresh_hw_device - This command refreshes the whole device and all debug cores if no target is provided.
-
report_property - This command displays all the properties for a given target.
For example, to report all of the properties for the second enabled DDRMC:
report_property [lindex [ get_hw_ddrmcs] 1 ]Note: The memory controller numbering in Hardware Manager starts from 1, but the Tcl lindex command starts from 0. If there are two enabled DDRMCs, their index numbers will be 0 and 1, regardless of their physical location on the ACAP device. -
report_hw_ddrmc - This command provides a formatted text output summarizing data that is provided in the GUI.
Following is an example of the output.
Figure 1. report_hw_ddrmc
