The MRPHY GTM solution starts with a base configuration generated using the Multi-Rate GT Wizard. The base configuration sets the number of GTM duals included in the core (one to four) and settings for the default rate used on power-up.
- Open the IP catalog and select the Select to
Enable Multi Rate configurations radio box and configure the other
settings for your default rate.
- Set the value of Number of
Duals between 1 to 4 and DRP clock frequency to the desired configuration and
disable location information.
- Set the remaining parameters for the desired default rate and select OK to confirm all settings.
- Generate the IP.
You can optionally generate the Example Design for the newly create multi-rate core. This design includes the properly configured rate table that can be leveraged for the final project. It also includes the helper logic, stimulus generator, and traffic checker for the default rate.