Program Device - 1.2 English

Multi-Scaler LogiCORE IP Product Guide (PG325)
Document ID
PG325
Release Date
2023-12-20
Version
1.2 English
Perform the following steps to run the software application.
Important: To do so, make sure that the hardware is powered on and a Digilent Cable or a USB Platform Cable is connected to the host PC. Also, ensure that a USB cable is connected to the UART port of the ZCU102 board.
  1. Launch Vitis.
  2. Set workspace to vmulti_scaler_example.sdk folder in prompted window. The Vitis project opens automatically (if a welcome page shows up, close that page).
  3. Download the bitstream into the FPGA by selecting Xilinx Tools > Program FPGA. The Program FPGA dialog box opens.
  4. Ensure that the Bitstream field shows the bitstream file generated by Tcl script, and then click Program.
    Note: The DONE LED on the board turns green if the programming is successful.
  5. A terminal program (HyperTerminal or PuTTY) is needed for UART communication. Open the program, choose appropriate port, set baud rate to 115200, and establish Serial port connection.
  6. Select and right-click the application vmulti_scaler_example_design in the Project_Explorer panel.
  7. Select Run As > Launch on Hardware (GDB).
  8. Select Binaries and Qualifier in the window, and click OK.
The example design test results are shown in terminal program. For more information, visit https://www.xilinx.com/tools/vitis.htm.

When executed on the board, the operations are listed in readme.txt in the examples folder. The video input tested are 1080p and 720p.