Generate the Clock for the NoC IP - 3.3 English

Versal ACAP CPM DMA and Bridge Mode for PCI Express Product Guide (PG347)

Document ID
PG347
Release Date
2022-11-02
Version
3.3 English
Next, generate a clock source for the NoC module. To do this, you will configure and generate the Simulation Clock and Reset Generator IP core.
  1. Click Add IP, and search for Simulation Clock and Reset Generator.
  2. From the filtered list, double-click the Simulation Clock and Reset Generator IP core to instantiate the IP on the block design canvas.

    Configure the core as follows:

  3. For Number of SYS clocks, select 1.
  4. For Sys Clock 0 Frequency (MHz), enter 200.
  5. For Number of AXI Clocks, select 0.
  6. For Number of Resets Ports, select 0.
  7. Click OK to generate IP.