Customizing and Generating the Subsystem - 1.2 English

HDMI 2.1 Transmitter Subsystem Product Guide (PG350)

Document ID
PG350
Release Date
2022-04-27
Version
1.2 English

This section includes information about using Xilinx® tools to customize and generate the subsystem in the Vivado® Design Suite.

The HDMI 2.1 TX Subsystem can be added to a Vivado IP integrator block design in the Vivado Design Suite and can be customized using IP catalog.

If you are customizing and generating the subsystem in the Vivado IP integrator, see the Vivado Design Suite User Guide: Designing IP Subsystems using IP Integrator (UG994) for detailed information. IP integrator might auto-compute certain configuration values when validating or generating the design. To check whether the values do change, see the description of the parameter in this chapter. To view the parameter value, run the validate_bd_design command in the Tcl console.

You can customize the IP for use in your design by specifying values for the various parameters associated with the IP subsystem using the following steps:

  1. In the Flow Navigator, click on Create Block Diagram or Open Block Design under the IP Integrator heading.
  2. Right-click in the diagram and select Add IP.

    A searchable IP catalog opens. You can also add IP by clicking on the Add IP button on the left side of the IP Integrator Block Design canvas.

  3. Click on the IP name and press the Enter key on your keyboard or double click on the IP name.
  4. Double-click the selected IP block or select the Customize Block command from the right-click menu.

For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) and the Vivado Design Suite User Guide: Getting Started (UG910).

Figures in this chapter are illustrations of the Vivado IDE. The layout depicted here might vary from the current version.