The following table describes external BSCAN interface signals:
Signal | I/O | Width | Description |
---|---|---|---|
bscanid_en | I | 1 | Enable input for BSCAN ID. |
capture | I | 1 | CAPTURE input from controller. |
drck | I | 1 | Gated TCK input. |
reset | I | 1 | Reset input from controller. |
runtest | I | 1 | Input asserted when TAP controller is in run Test/Idle state. |
sel | I | 1 | USER instruction active input. |
shift | I | 1 | SHIFT input from controller. |
tck | I | 1 | Test clock input. |
tdi | I | 1 | Test data input (TDI) input from controller. |
tdo | O | 1 | Test data output (TDO) output for USER function. |
tms | I | 1 | Test mode select input. |
update | I | 1 | UPDATE input from controller. |