User Parameters - 2.1 English

UHD-SDI GT LogiCORE IP Product Guide (PG380)

Document ID
PG380
Version
2.1 English

The following table shows the relationship between the fields in the Vivado® IDE and the user parameters (which can be viewed in the Tcl Console).

Table 1. Vivado IDE Parameter to User Parameter Relationship
Vivado IDE Parameter User Parameter Default Value
Core Parameters
GT Type C_GT_TYPE GTHE4
Data Flow C_DATA_FLOW Duplex
LINE RATE C_LINE_RATE 12G-SDI
SDI link(s) C_SDI_LINKS 1
GT COMMON Shared Logic SupportLevel 1 (include GT COMMON in the core)
QPLL0 Ref Clock Selection C_QPLL0_Refclk_Sel GTREFCLK0
QPLL1 Ref Clock Selection C_QPLL1_Refclk_Sel GTREFCLK1
CPLL Ref Clock Selection (Integer) C_CPLL0_Refclk_Sel GTREFCLK0
CPLL Ref Clock Selection (Fractional) C_CPLL1_Refclk_Sel GTREFCLK0
DRP Clock Frequency C_DRP_CLK_FREQ 100.0
LINE_RATE C_LINE_RATE 12G-SDI
Enable_PICXO_Ports C_Enable_PICXO_Ports False
MODE C_SDI_MODE PICXO
SDI Link 0
Link 0 TX PLL1 Type C_Tx_PLL_Selection_INTF_0 No default value is assigned. User selection is mandatory.
Link 0 RX PLL1 Type C_Rx_PLL_Selection_INTF_0
Link 0 TX PLL2 Type C_Tx_PLL2_Selection_INTF_0
Link 0 RX PLL2 Type C_Rx_PLL2_Selection_INTF_0
SDI Link 1
Link 1 TX PLL1 Type C_Tx_PLL_Selection_INTF_1 No default value is assigned. User selection is mandatory
Link 1 RX PLL1 Type C_Rx_PLL_Selection_INTF_1
Link 1 TX PLL2 Type C_Tx_PLL2_Selection_INTF_1
Link 1 RX PLL2 Type C_Rx_PLL2_Selection_INTF_1 No default value is assigned. User selection is mandatory
SDI Link 2
Link 2 TX PLL1 Type C_Tx_PLL_Selection_INTF_2 No default value is assigned. User selection is mandatory
Link 2 RX PLL1 Type C_Rx_PLL_Selection_INTF_2
Link 2 TX PLL2 Type C_Tx_PLL2_Selection_INTF_2
Link 2 RX PLL2 Type C_Rx_PLL2_Selection_INTF_2
SDI Link 3
Link 3 TX PLL1 Type C_Tx_PLL_Selection_INTF_3 No default value is assigned. User selection is mandatory
Link 3 RX PLL1 Type C_Rx_PLL_Selection_INTF_3
Link 3 TX PLL2 Type C_Tx_PLL2_Selection_INTF_3
Link 3 RX PLL2 Type C_Rx_PLL2_Selection_INTF_3