Figure 1. Versal ACAP GT Controller for DisplayPort and SDI GUI
- Enable TX
- Check Enable TX check box to enable the transmitter path of the IP.
- Enable RX
- Check Enable RX check box to enable the receiver path of the IP.
- Number of TX Lanes
- Select the required number of DP TX lanes. Available options
for DP are:
- 4 lane
- 2 lane
- 1 lane
- Number of RX Lanes
- Select the required number of DP RX lanes. Available options
for DP are:
- 4 lane
- 2 lane
- 1 lane
- Maximum Line rate of TX
- Select the line rate for DP TX. Available options for DP
are:
- 1.62
- 2.7
- 5.4
- 8.1
- Maximum Line rate of RX
- Select the line rate for DP RX. Available options for DP
are:
- 1.62
- 2.7
- 5.4
- 8.1
- TX PLL
- For DP subsystems, the TXPLL is fixed to RPLL.
- LCPLL
- RCPLL
- RX PLL
- For DP subsystems, the RXPLL is fixed to LCPLL.
- LCPLL
- RCPLL
SDI
Figure 2. Versal ACAP GT Controller for DisplayPort and SDI GUI
- GT Direction
- Select the required GT Direction. The available options for SDI are:
- Simplex Tx
- Simplex Rx
- DuplexNote: This option will not be available when the rate grouping feature is enabled.
- Rate Grouping
- Available options for SDI are:
-
- True
- Enable this option only when use-case is multilink SDI that has three or more links supported in a QUAD with Individual Reference clocks for Rx and Tx.
-
- False
- Disable this option for all the use-cases where the True option is invalid.
-
For more details on Rate Grouping, refer to Product Specification.
- TX PLL
- For SDI Subsystems, the available options are:
- LCPLL
- RCPLL
- RX PLL
- For SDI Subsystems, the available options are:
- LCPLL
- RCPLL
- PICXO
- Enable the option to use PICXO in SDI Subsystems. This option is only valid for SDI Subsystems.