| 0 |
Used in Duplex and RX only mode. If set to 1,
indicates that LCPLL has been locked |
| 1 |
Used in Duplex and RX only mode. If set to 1,
indicates that channel 0 RX reset done has been synced |
| 2 |
Used in Duplex and RX only mode. If set to 1,
indicates that RX changes have been applied |
| 3 |
Used in Duplex and RX only mode. RX fabric
reset |
| 4 |
Used in Duplex and RX only mode. RX modes
locked |
| 5 |
Used in Duplex and RX only mode. If set to 1,
indicates that received data is level B |
| 6 |
Reserved |
| 7 |
Used in Duplex and RX only mode. Receiver clock
enable signal |
| 10:8 |
Used in Duplex and RX only mode. Receiver Mode
information |
| 11 |
Used in Duplex or TX only mode. If set to
1,indicates that RPLL has been locked |
| 12 |
Used in Duplex or TX only mode. If set to
1,indicates that channel 0 TX reset done has been synced |
| 13 |
Used in Duplex or TX only mode. If set to
1,indicates that TX changes have been applied |
| 14 |
Used in Duplex or TX only mode. Transmitter
fabric reset |
| 15 |
Reserved |