User Parameters - 1.0 English

The following table shows the relationship between the fields in the Vivado® IDE and the user parameters (which can be viewed in the Tcl Console).

Table 1. User Parameters
Vivado IDE Parameter ¹	Description	Default Value
C_WIDTH	Width of the input/output signal	1
C_FF_TYPE	Type of the flip-flop or latch	1
C_INIT	Initial value in the register	0x0
C_C_INVERTED	Specifies whether the CLK pin is active-High or active-Low	0
C_R_INVERTED	Specifies whether the RESET pin is active-High or active-Low	1
C_G_INVERTED	Specifies whether the GATE pin is active-High or active-Low	0
C_S_INVERTED	Specifies whether the SET pin is active-High or active-Low	0
C_CLR_INVERTED	Specifies whether the CLEAR pin is active-High or active-Low	0
C_PRE_INVERTED	Specifies whether the PRESET pin is active-High or active-Low	0
C_D_INVERTED	Specifies whether the D pin is active-High or active-Low	0
Parameter values are listed in the table where the Vivado IDE parameter value differs from the user parameter value. Such values are shown in this table as indented below the associated parameter.