Buffers Constraint - 2021.2 English

Versal ACAP AI Engine Programming Environment User Guide (UG1076)

Document ID
UG1076
ft:locale
English (United States)
Release Date
2021-12-17
Version
2021.2 English

This constrains a data buffer to a specific address on a specific tile. The data buffer can be attached to an input, output, or inout port of a kernel or param (e.g., a lookup table). The address can be specified in one of three different ways:

  • Column, row, and offset, where the tile is specified by column and row and the offset address is relative to the tile, starting at zero with a maximum value of 32768 (32k).
  • Column, row, and bankId, where the bank ID is relative to the tile and can take values 0, 1, 2, 3.
  • Offset, that can be between zero and 32768 (32k) and is relative to the tile allocated by the compiler.
Note: One or two buffers can be constrained for a port.

Syntax

"buffers": [<address>, <(optional) address>]
<address> ::= <offset_address> | <bank_address> | <offset_address>
<tile_address> ::= {
  "column": integer,
  "row": integer,
  "offset": integer
}
<bank_address> ::= {
  "column": integer,
  "row": integer,
  "bankId": integer
}
<offset_address> ::= {
  "offset": integer
}

Example

{
  "PortConstraints": {
    "mygraph.k2.out[0]": {
      "buffers": [{
        "column": 2,
        "row": 2,
        "offset": 5632
      }, {
        "column": 2,
        "row": 2,
        "offset": 4608
      }]
    },
    "mygraph.k1.out[0]": {
      "buffers": [{
        "column": 2,
        "row": 3,
        "bankId": 2
      }, {
        "column": 2,
        "row": 3,
        "bankId": 3
      }]
    },
    "mygraph.p1": {
      "buffers": [{
        "offset": 512
      }]
    }
  }
}