Versal AI Core series devices include an AI Engine array with the following column categories.
- PL column
- provides PL stream access. Each column supports eight 64-bit slave channels for streaming data into the AI Engine and six 64-bit master channels for streaming data to the PL.
- NoC column
- provides connectivity between the AI Engine array and the NoC. These interfaces can also connect to the PL.
To instruct the
aiecompiler to select higher frequency
interfaces, use the
specify the clock frequency (in MHz) for the PL kernels. The default value is one
quarter of the AI Engine frequency and the
maximum supported value is a half of the AI Engine frequency, the values depending on the speed grade. Following are examples:
- Option to enable an AI Engine to PL
frequency of 300 MHz for all AI Engine to PL
- To set a different frequency for a specific PLIO interface use the following
code to set it in the ADF
adf::PLIO *<input>= new adf::PLIO(<logical_name>, <plio_width>, <file>, <FreqMHz>);
The AI Engine to PL AXI4-Stream channels use boundary logic interface (BLI) connections that include optional BLI registers with the exception of the slave channels 3 and 7. The two slave channels channel 3 and channel 7 are slower interfaces. The performance of the data transfer between the AI Engine and PL depends on whether the optional BLI registers are enabled or not.
For less timing-critical designs, all eight channels can be used without using the BLI registers. PL timing can still be met in this case. However, for higher frequency designs, only the six fast channels (0,1,2,4,5,6) can be used and the timing paths from the PL must be registered, using the BLI registers.
To control the use of BLI registers across the AI Engine to PL channels, use the
--pl-register-threshold=<number> compiler option, specified in MHz.
The default value is 1/8 of the AI Engine
frequency based on speed grade. Following is an example:
The compiler will map any PLIO interface with an AI Engine to PL frequency higher than this setting (125 MHz in this case) to high-speed channels with the BLI registers enabled. If the PLIO interface frequency is not higher than the
pl-register-thresholdvalue then any of the AI Engine to PL channels will be used.
In summary, if
pl-register-threshold all eight channels can be used
pl-register-threshold only the six fast channels can be used, with
pl-register-threshold is a way to control
the threshold frequency beyond which only fast channels can be used (with registering).