Sequencer Modes

Zynq UltraScale+ Device Technical Reference Manual (UG1085)

Document ID
UG1085
Release Date
2022-09-15
Revision
2.3 English

The SYSMON units can sequence through a list of enabled channels once or continuously. The analog inputs are time-multiplexed in a fixed order and presented to the ADC input circuitry one at a time. As readings are taken, the minimum and maximum values are stored for each channel. Measurements can also be averaged over successive readings. The sequencer follows the SEQ_CHANNEL and SEQ_LOW_RATE_CHANNEL register settings in the order shown in Table: PS SYSMON Sensor Channels and Table: Measurement Registers in AMS Register Set.