Single-channel Mode

Zynq UltraScale+ Device Technical Reference Manual (UG1085)

Document ID
UG1085
Release Date
2023-12-21
Revision
2.4 English

The single-channel mode measures one sensor channel at a time.

1.Write the channel number into the CONFIG_REG0 [mux_channel] bit field and select single-channel mode in the CONFIG_REG1 [sequence_mode] bit field.

The sensor channel numbers are listed in the sensor channel tables. All channels support long acquisition [ACQ] and the external channels support input sampling type [BU] functions (refer to the CONFIG_REG0 register).

2.Wait for the EOC interrupt and then read the associated measurement register.