CONFIG_REG4 (PSSYSMON) Register Description
| Register Name | CONFIG_REG4 |
|---|---|
| Offset Address | 0x0000000110 |
| Absolute Address | 0x00FFA50910 (AMS_PS_SYSMON) |
| Width | 16 |
| Type | rwNormal read/write |
| Reset Value | 0x00000000 |
| Description | Configuration, Reg 4. |
PS SysMon does not implement the PM Bus.
CONFIG_REG4 (PSSYSMON) Register Bit-Field Summary
| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
| low_rate_eos | 11:10 | rwNormal read/write | 0x0 | Control generation of EOS relative to regular and low-rate (slow) sequencer. End of sequence is from: 00: regular rate. 01: low-rate (slow). 10: regular and low-rate (slow). 11: regular rate (default). |
| sequence_rate | 9:8 | rwNormal read/write | 0x0 | When using the low-rate sample mode, this field determines the divided down conversion rate from normal. Channels can be either a normal sample rate (SEQ_CHANNEL{0:2}) or a less frequent sample rate (SEQ_LOW_RATE_CHANNEL{0:2}). 00: every sequence. 01: every 4th Sequence. 10: every 16th Sequence 11: every 64th Sequence. When including a channel in the sequence, the user must ensure that each selected channel is either in the normal or low-rate sequence register, but not both. Channels not in the sequence are not selected in either sequence channel type. |