DX2GSR2 (DDR_PHY) Register Description
Register Name | DX2GSR2 |
---|---|
Offset Address | 0x00000009E8 |
Absolute Address | 0x00FD0809E8 (DDR_PHY) |
Width | 32 |
Type | roRead-only |
Reset Value | 0x00000000 |
Description | DATX8 n General Status Register 2 |
DX2GSR2 (DDR_PHY) Register Bit-Field Summary
Field Name | Bits | Type | Reset Value | Description |
---|---|---|---|---|
GSDQSPRD | 31:23 | roRead-only | 0x0 | Read DQS gating Status Period: Returns the DDR clock period measured by the read DQS gating status LCDL during calibration. This value is PVT compensated. |
GSDQSCAL | 22 | roRead-only | 0x0 | Read DQS Gating Status Calibration: Indicates, if set, that the DATX8 has finished doing period measurement calibration for the read DQS gating status LCDL. |
Reserved | 21 | roRead-only | 0x0 | Reserved. Return zeroes on reads. |
DQS2DQERR | 15:12 | roRead-only | 0x0 | Write DQS2DQ training error: Indicates, if set, that the DATX8 has encountered an error during execution of the write DQS2DQ training Each 2 bits indicate error on one rank. (e.g. bits [13:12] shows error on rank 0) Status encoding are: 2'b00: No Error 2'b01: Oscillator results are all 0s 2'b10: Oscillator results are all 1s 2'b11: Oscillator results read timeout |
ESTAT | 11:8 | roRead-only | 0x0 | Error Status: If an error occurred for this lane as indicated by RDERR, WDERR, REERR or WEERR the error status code can provide additional information regard when the error occurred during the algorithm execution. |
WEWN | 7 | roRead-only | 0x0 | Write Eye Centering Warning: Indicates, if set, that the DATX8 has encountered a warning during execution of the write eye centering training. |
WEERR | 6 | roRead-only | 0x0 | Write Eye Centering Error: Indicates, if set, that the DATX8 has encountered an error during execution of the write eye centering training. |
REWN | 5 | roRead-only | 0x0 | Read Eye Centering Warning: Indicates, if set, that the DATX8 has encountered a warning during execution of the read eye centering training. |
REERR | 4 | roRead-only | 0x0 | Read Eye Centering Error: Indicates, if set, that the DATX8 has encountered an error during execution of the read eye centering training. |
WDWN | 3 | roRead-only | 0x0 | Write Bit Deskew Warning: Indicates, if set, that the DATX8 has encountered a warning during execution of the write bit deskew training. |
WDERR | 2 | roRead-only | 0x0 | Write Bit Deskew Error: Indicates, if set, that the DATX8 has encountered an error during execution of the write bit deskew training. |
RDWN | 1 | roRead-only | 0x0 | Read Bit Deskew Warning: Indicates, if set, that the DATX8 has encountered a warning during execution of the read bit deskew training. |
RDERR | 0 | roRead-only | 0x0 | Read Bit Deskew Error: Indicates, if set, that the DATX8 has encountered an error during execution of the read bit deskew training. |