IDR_0 (AMS) Register

Zynq UltraScale+ Devices Register Reference (UG1087)
Document ID
UG1087
Release Date
2024-03-13
Revision
1.10

IDR_0 (AMS) Register Description

Register NameIDR_0
Offset Address0x0000000028
Absolute Address 0x00FFA50028 (AMS_CTRL)
Width32
TypewoWrite-only
Reset Value0x00000000
DescriptionInterrupt Disable, Reg 0.

Write-only. 0: no effect. 1: disable interrupt (mask = 1).

IDR_0 (AMS) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
pl_alm_1531woWrite-only0x0PL Sensor Alarms -- OR of bits [29:16].
pl_alm_1430woWrite-only0x0reserved
pl_alm_1329woWrite-only0x0reserved
pl_alm_1228woWrite-only0x0PL ADC voltage, VCCADC.
pl_alm_1127woWrite-only0x0PL VUser3.
pl_alm_1026woWrite-only0x0PL VUser2.
pl_alm_925woWrite-only0x0PL VUser1.
pl_alm_824woWrite-only0x0PL VUser0.
pl_alm_723woWrite-only0x0PL Sensor Alarms -- OR of bits [22:16].
pl_alm_622woWrite-only0x0VCCBRAM.
pl_alm_319woWrite-only0x0PL VP_VN.
pl_alm_218woWrite-only0x0PL VCCAUX.
pl_alm_117woWrite-only0x0PL VCCIINT.
pl_alm_016woWrite-only0x0PL temperature.
ps_alm_1515woWrite-only0x0PS Sensor Alarms -- OR of bits [13:0].
ps_alm_1414woWrite-only0x0reserved
ps_alm_1313woWrite-only0x0FPD temperature.
ps_alm_1212woWrite-only0x0VCC_PSADC voltage.
ps_alm_1111woWrite-only0x0PS_MGTRAVTT voltage (supply10).
ps_alm_1010woWrite-only0x0PS_MGTRAVCC voltage (supply9).
ps_alm_9 9woWrite-only0x0VCCO_PSIO2 I/O bank 502, MIO[52:77].
ps_alm_8 8woWrite-only0x0VCCO_PSIO1 I/O bank 501, MIO[26:51].
ps_alm_7 7woWrite-only0x0PS Sensor Alarms -- OR of bits [6:0].
ps_alm_6 6woWrite-only0x0VCCO_PSIO0 I/O bank 500, MIO[0:25].
ps_alm_5 5woWrite-only0x0VCCO_PSIO3 I/O bank 503, boot mode, serial config, JTAG, error output, error status, SRST, POR.
ps_alm_4 4woWrite-only0x0VCCO_PSDDR, bank 504, DDR I/O.
ps_alm_3 3woWrite-only0x0VCCO_PSAUX auxiliary power supply for BPU, eFuse, GPIOB logic.
ps_alm_2 2woWrite-only0x0FPD internal voltage, VCC_PSINTFP.
ps_alm_1 1woWrite-only0x0LPD internal voltage, VCC_PSINTLP.
ps_alm_0 0woWrite-only0x0LPD temperature.