ITATBDATA0 (FUNNEL3P) Register

Zynq UltraScale+ Devices Register Reference (UG1087)

Document ID
UG1087
Release Date
2024-03-13
Revision
1.10

ITATBDATA0 (FUNNEL3P) Register Description

Register NameITATBDATA0
Offset Address0x0000000EEC
Absolute Address 0x00FE910EEC (CORESIGHT_SOC_FUNN_0)
Width32
TyperwNormal read/write
Reset Value0x00000000
DescriptionThe Integration Test ATB Data 0 Register performs different functions depending on whether the access is a read or a write: A write outputs data on byte boundaries of ATDATAM.
A read returns the data from ATDATASn, where n is defined by the status of the Funnel Control register at 0x000. The read data is only valid when ATVALIDSn is HIGH.

ITATBDATA0 (FUNNEL3P) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
ATDATA31 4rwNormal read/write0x0Set the value of the ATDATAM[31] output:
ATDATAM23 3rwNormal read/write0x0Set the value of the ATDATAM[23] output:
ATDATA15 2rwNormal read/write0x0Set the value of the ATDATAM[15] output:
ATDATA7 1rwNormal read/write0x0Set the value of the ATDATAM[7] output:
ATDATA0 0rwNormal read/write0x0Set the value of the ATDATAM[0] output: