ITCTRL (CTI) Register Description
Register Name | ITCTRL |
---|---|
Offset Address | 0x0000000F00 |
Absolute Address |
0x00FEBF8F00 (CORESIGHT_R5_CTI_0) 0x00FEBF9F00 (CORESIGHT_R5_CTI_1) 0x00FE990F00 (CORESIGHT_SOC_CTI_0) 0x00FE9A0F00 (CORESIGHT_SOC_CTI_1) 0x00FE9B0F00 (CORESIGHT_SOC_CTI_2) |
Width | 32 |
Type | rwNormal read/write |
Reset Value | 0x00000000 |
Description | This register is used to enable topology detection. For more information see the CoreSight Architecture Specification. This register enables the component to switch from a functional mode, the default behavior, to integration mode where the inputs and outputs of the component can be directly controlled for the purpose of integration testing and topology solving. Note: When a device has been in integration mode, it might not function with the original behavior. After performing integration or topology detection, you must reset the system to ensure correct behavior of CoreSight and other connected system components that are affected by the integration or topology detection. |
ITCTRL (CTI) Register Bit-Field Summary
Field Name | Bits | Type | Reset Value | Description |
---|---|---|---|---|
IME | 0 | rwNormal read/write | 0x0 | Allows the component to switch from functional mode to integration mode or back. |