SEQ_INPUT_MODE0 (PLSYSMON) Register Description
| Register Name | SEQ_INPUT_MODE0 |
|---|---|
| Offset Address | 0x0000000130 |
| Absolute Address | 0x00FFA50D30 (AMS_PL_SYSMON) |
| Width | 16 |
| Type | rwNormal read/write |
| Reset Value | 0x00000000 |
| Description | Sequencer Bipolar Input Mode, Group 0. |
The VP_VN sensor sampling circuit can be programmed to be unipolar (unsigned value) or bipolar (signed value). 0: disabled. 1: enabled. All PL voltage nodes use unipolar sampling circuits except VP_VN and VUser{0:3} support unipolar or bipolar. Note: UG580 refers to this register as SEQINMODE0.
SEQ_INPUT_MODE0 (PLSYSMON) Register Bit-Field Summary
| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
| input_mode0 | 15:0 | rwNormal read/write | 0x0 | Bit[11] is for VP_VN. All others are reserved. |