alignment_errors (GEM) Register

Zynq UltraScale+ Devices Register Reference (UG1087)

Document ID
UG1087
Release Date
2024-03-13
Revision
1.10

alignment_errors (GEM) Register Description

Register Namealignment_errors
Offset Address0x000000019C
Absolute Address 0x00FF0B019C (GEM0)
0x00FF0C019C (GEM1)
0x00FF0D019C (GEM2)
0x00FF0E019C (GEM3)
Width32
TypemixedMixed types. See bit-field details.
Reset Value0x00000000
DescriptionAlignment Errors

alignment_errors (GEM) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
Reserved31:10roRead-only0x0Reserved, read as 0, ignored on write.
count 9:0rwNormal read/write0x0Alignment errors - a 10 bit register counting frames that are not an integral number of bytes long and have bad CRC when their length is truncated to an integral number of bytes and are between 64 and 1518 bytes in length (1536 if bit 8 set in network configuration register, 10,240 bytes if bit 3 is set in the network configuration register). This register is also incremented if a symbol error is detected and the frame is of valid length and does not have an integral number of bytes.