bbram_aes_crc (BBRAM) Register

Zynq UltraScale+ Devices Register Reference (UG1087)

Document ID
UG1087
Release Date
2024-03-13
Revision
1.10

bbram_aes_crc (BBRAM) Register Description

Register Namebbram_aes_crc
Offset Address0x000000000C
Absolute Address 0x00FFCD000C (BBRAM)
Width32
TypewoWrite-only
Reset Value0x00000000
DescriptionBBRAM AES Key Integrity Check

bbram_aes_crc (BBRAM) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
aes_crc_value31:0woWrite-only0x0Writing the AES key CRC value to this register will start the AES integrity check. When the check is finished the AES_CRC_DONE bit will be set in the BBRAM_STATUS register. If the value calculated by the BBRAM controller matches the value writen to this register, then the AES_CRC_PASS bit will also be set. The CRC check can only be performed when the BBRAM is in programming mode.