designcfg_debug1 (GEM) Register Description
| Register Name | designcfg_debug1 |
|---|---|
| Offset Address | 0x0000000280 |
| Absolute Address |
0x00FF0B0280 (GEM0) 0x00FF0C0280 (GEM1) 0x00FF0D0280 (GEM2) 0x00FF0E0280 (GEM3) |
| Width | 32 |
| Type | roRead-only |
| Reset Value | 0x0450011C |
| Description | The defined parameterized options to configure the IP are read here. |
designcfg_debug1 (GEM) Register Bit-Field Summary
| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
| axi_cache_value | 31:28 | roRead-only | 0x0 | Takes the value of the `gem_axi_cache_value DEFINE |
| dma_bus_width | 27:25 | roRead-only | 0x2 | Takes the value of the `gem_dma_bus_width DEFINE. |
| Reserved | 24 | roRead-only | 0x0 | Unused, read zero |
| irq_read_clear | 23 | roRead-only | 0x0 | Takes the value of the `gem_irq_read_clear DEFINE |
| no_snapshot | 22 | roRead-only | 0x1 | Takes the value of the `gem_no_snapshot DEFINE |
| no_stats | 21 | roRead-only | 0x0 | Takes the value of the `gem_no_stats DEFINE |
| no_scan_pins | 20 | roRead-only | 0x1 | Takes the value of the `gem_no_scan_pins DEFINE |
| user_in_width | 19:15 | roRead-only | 0x0 | Takes the value of the `gem_user_in_width DEFINE |
| user_out_width | 14:10 | roRead-only | 0x0 | Takes the value of the `gem_user_out_width DEFINE |
| user_io | 9 | roRead-only | 0x0 | Takes the value of the `gem_user_io DEFINE |
| apb_rev2 | 8 | roRead-only | 0x1 | Takes the value of the `gem_apb_rev2 DEFINE |
| apb_rev1 | 7 | roRead-only | 0x0 | Takes the value of the `gem_apb_rev1 DEFINE |
| ext_fifo_interface | 6 | roRead-only | 0x0 | Takes the value of the `gem_ext_fifo_interface DEFINE |
| no_int_loopback | 5 | roRead-only | 0x0 | Takes the value of the `gem_no_int_loopback DEFINE |
| int_loopback | 4 | roRead-only | 0x1 | Takes the value of the `gem_int_loopback DEFINE |
| TDC_50 | 3 | roRead-only | 0x1 | Takes the value of the `TDC_50 DEFINE |
| RDC_50 | 2 | roRead-only | 0x1 | Takes the value of the `RDC_50 DEFINE |
| serdes | 1 | roRead-only | 0x0 | Takes the value of the `gem_serdes DEFINE |
| no_pcs | 0 | roRead-only | 0x0 | Takes the value of the `gem_no_pcs DEFINE |