Vitis Platforms

Vitis base platforms are available in the kv260-vitis GitHub repository. For the KV260 Starter Kit, the following Vitis base platforms are available. Because additional KV260 base platforms are added and updated over time, be sure to reference the repository for the most up to date list of platforms before starting your design work.

kv260_ispMipiRx_vcu_DP

Video capture using the IAS ISP MIPI interface for a AR1335 sensor module configuration
Display using standard DisplayPort and/or HDMI™
Audio transmit and receive (I2S) via PMOD audio codec
Video codec unit (VCU) encode/decode and one stream encode buffer
Support for 4k30 and 1080p30 in NV12 video formats

kv260_vcuDecode_vmixDP

VCU decode of four input streams
Display using video mixer (VMIX) to DisplayPort and/or HDMI for 2x2 display configuration
Resolution support for 1080p30 for each stream

kv260_ispMipiRx_vmixDP

Video capture using the IAS ISP MIPI interface for a AR0144 sensor module configuration
VCU decoding of four streams
Display using video mixer (VMIX) to DisplayPort and/or HDMI for 2x2 display configuration

Vitis base platforms are built within the context of a specific hardware target and the physical peripheral interfaces they enable.

starter-kit-name_interface1_interface2

For example, the kv260_ispMipiRx_vcu_DP base platform targets the KV260 Starter Kit and enables a MIPI receive interface to the ISP on the carrier card and a standard single video stream to the DisplayPort.

For additional information about the Vitis tools and Vitis base platform work flows, see Vitis Unified Software Platform Documentation: Application Acceleration Development (UG1393).