In earlier releases, u-boot-zynq-scr.bbappend and bootcmd files were available in
meta-user layers. In the 2022.2 release, they are removed from the meta-user layer
and moved to Yocto eSDKs at <plnx-proj-root>/components/yocto/layers/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.
You can find these files on running the
buildtools-extended as an
petalinux-config. Enable this option to
use gcc and other binaries as part of the PetaLinux tool. If you are using the newer
Yocto version, Honister, to build the project, the gcc version should be higher than
version 6 which is not available by default in most of the supported operating
systems. Enable this option to unblock this issue.
AUTO-LOGIN option in PetaLinux tool is disabled by default. User can
enable this with
petalinux-config -c rootfs -→ Image
Features -→ [ ] auto-login if required..
Linux Components Selection
Added Image selector menuconfig option. It is disabled by default.