Zynq UltraScale+ MPSoC Overview - 2023.1 English

Zynq UltraScale+ MPSoC ZCU106 Video Codec Unit Targeted Reference Design User Guide (UG1250)

Document ID
UG1250
Release Date
2023-05-16
Version
2023.1 English

The Zynq device is a heterogeneous, multi-processing SoC built on the 16-nm FinFET technology. This Figure shows a high-level block diagram of the device architecture and key building blocks inside the processing system (PS) and the programmable logic (PL).

Figure 1-1: Zynq UltraScale+ MPSoC Block Diagram

X-Ref Target - Figure 1-1

X20051-zynq-ultrascale-plus-mpsoc-block-diagram.jpg

The MPSoC key features include:

Application processing unit (APU) with a 64-bit quad-core Arm® Cortex™-A53 processor

Real-time processing unit (RPU) with a 32-bit dual-core Arm Cortex-R5 processor

Multimedia blocks

° Graphics processing unit (GPU) Arm Mali-400MP2

° Video codec (encoder/decoder) unit up to 4K (3840 x 2160) 60 frames per second (FPS)

° DisplayPort controller interface up to 4K (3840 x 2160) 30 FPS

High-speed peripherals

° PCIe root complex and Endpoint (Gen1 or Gen2 x1, x2, and x4 lanes)

° USB 3.0/2.0 with host, device and on-the-go (OTG) modes

° SATA 3.1 host

Low-speed peripherals

° Gigabit Ethernet, controller area network (CAN), universal asynchronous receiver-transmitter (UART), Serial Peripheral Interface (SPI), Quad SPI, NAND flash memory, Secure Digital embedded Multimedia Card (SD/eMMC), inter IC (I2C), and general purpose I/O (GPIO)

Platform management unit (PMU)

Configuration security unit (CSU)

6-port DDR controller with error correction code (ECC), supporting x32 and x64 DDR4/3/3L and LPDDR4/3