Launch Bootgen GUI - 2023.2 English

Bootgen User Guide (UG1283)

Document ID
UG1283
Release Date
2023-10-18
Version
2023.2 English

The Vitis Unified IDE is introduced in 2023.2. The Vitis Unified IDE uses the Theia environment, however the Vitis Classic IDE uses Eclipse. The Bootgen functions the same in both the Vitis Classic, and Vitis Unified. However, the layout of the GUI is different. In this section, both the GUI flows for Vitis Unified and Vitis Classic are discussed.

To create a boot image using both the AMD Vitis™ Classic and Unified IDE, do either of the following:
  • For Vitis Unified IDE, highlight the application component in the Vitis Components view and then in the Flow view, select Create Boot Image.
  • For Vitis Classic IDE, Select the application project in the Project Navigator or C/C++ Projects view and right-click Create Boot Image.
  • Alternatively, for both Vitis Classic and Unified IDE click Vitis > Create Boot Image > Target Device Family.
    The supported device families are:
    • AMD Zynq™ and Zynq AMD UltraScale+™
    • AMD Versal™