[Figure 1, callout 24]
The following table defines VCU128 board status and user LEDs.
| Reference Designator | Description (Green unless otherwise noted) |
|---|---|
| DS1 | Combined power good (red/green) |
| DS2 | GPIO_LED_1 |
| DS3 | GPIO_LED_0 |
| DS4 | GPIO_LED_2 |
| DS5 | GPIO_LED_5 |
| DS6 | GPIO_LED_4 |
| DS7 | GPIO_LED_5 |
| DS8 | GPIO_LED_6 |
| DS9 | GPIO_LED_7 |
| DS10 | FPGA INIT (red/green) |
| DS11 | VCCINT 0.85V Mode |
| DS12 | VCCINT 0.72V Mode |
| DS13 | FPGA done |
| DS14 | VADJ_PG |
| DS15 | SYSTEM CTLR INIT (red/green) |
| DS16 | SYSTEM CTLR error (red) |
| DS17 | SYSTEM CTLR status |
| DS18 | SYSTEM CTLR done |
| DS19 | ENET PHY link |
| DS20 | 12V On |
| EPHY P2 RT | ENET LINK1000 |
| EPHY P2 LFT | ENET link activity |