Click the Interrupts button to display the page shown in the following figure (this example is for RF-DAC).
Figure 1. Interrupts Status Page
The check box at the beginning of each row enables or disables (masks) the corresponding interrupts status. Click the Apply button to apply the selected interrupts status.
The Refresh button reads back the current status and the green light shows which corresponding interrupt bit is set.
The Clear button attempts to clear all interrupt bits and read back the status.
Recommended: It is good practice
to check the interrupts status and solve the root cause if an interrupt bit has been set
before generating or receiving data. For example, the FIFO or datapath overflow can
corrupt data and provide an incorrect result.