Micro USB Connectors

Alveo Programming Cable User Guide (UG1377)

Document ID
UG1377
Release Date
2022-08-19
Revision
1.3 English

The programming module has two micro-USB connectors (call-outs 2 and 3 in Figure 1), one for each FT4232 USB to multi-protocol converter. Connect the external micro-USB cable from the host to the micro-USB connector 1 (call-out 2 in Figure 1). The micro-USB connector number 2 should be left unused (call-out 3 in Figure 1). The pin description of the micro-USB connector is listed in the following table.

Table 1. Micro-USB Connectors
Pin Number Signal Name Functionality
1 USB_VBUS USB power
2 USB_DN USB differential data –
3 USB_DP USB differential data +
4 USB_ID USB ID
5 GND Ground
6 GND Shield ground
7 GND
8 GND
9 GND
10 GND
11 GND