To automatically address most timing closure challenges during implementation,
you can use an Intelligent Design Run (IDR). An IDR is a special type of implementation
run that leverages
strategy predictions, and incremental compile. An IDR can run up to six iterations of
place and route, which leads to a typical compile time of 3.5 times that of a standard
run. However, using IDR can provide significant benefits by reducing the knowledge
required to close timing and by saving hours of user analysis.
An IDR comprises the following stages:
report_qor_suggestionsto apply optimization properties to elements in the design in a predetermined order.
- Uses machine learning (ML) strategies to generate tool options for
route_designthat are optimized for the design.
To ensure success when using IDR, follow these requirements:
- The implementation must be project based. For non-project users, the
easiest method is to create a post-synthesis netlist-based project using a
- The design must have a baseline with accurate and achievable constraints.
- All designs must comply with the recommended methodology, as
reported by the
- An SLR-based floorplan might be required for SSI technology-based devices.
- Apply only automatic implementation suggestions. Text-based
suggestions or suggestions with
APPLICABLE_FOR = synth_designmust be applied before starting an IDR.
For more information see this link in the Vivado Design Suite User Guide: Design Analysis and Closure Techniques (UG906).