reset - 2021.2 English

Vitis Unified Software Platform Documentation: Application Acceleration Development (UG1393)

Document ID
UG1393
ft:locale
English (United States)
Release Date
2021-12-15
Version
2021.2 English
Important: This option cannot be used with embedded processor platforms.

The reset command resets the programmable region on the card. All running CUs in the region are stopped and reset.

It has the following command line format:

xbutil reset [-d card]

The following table lists the available option.

Table 1. xbutil reset Command Option
Option Description Required
-d <card> Specifies the target card. <card> can be specified as either the card_id or Bus:Device:Function (BDF). Defaults to card_id = 0 if not specified.
Note: Use the xbutil scan command to display both the card_id and BDF for installed cards.
N

The following example shows the output after running this command successfully:

All existing processes will be killed.
Are you sure you wish to proceed? [y/n]: y