Creating Additional Solutions - 2021.2 English

Vitis High-Level Synthesis User Guide (UG1399)

Document ID
UG1399
ft:locale
English (United States)
Release Date
2021-12-15
Version
2021.2 English

The most typical use of Vitis HLS is to create an initial design, analyze the results, and then perform optimizations to meet the desired area and performance goals. This is often an iterative process, requiring multiple steps and multiple optimizations to achieve the desired results. Solutions offer a convenient way to configure the tool, add directives to your function to improve the results, and preserve those results to compare with other solutions.

To create an additional solution for your , use the Project > New Solution menu command, or the New Solution toolbar button . This opens the Solution Wizard as shown in the following figure.

Figure 1. Solution Wizard

The Solution Wizard has the same options as described in Creating a New Vitis HLS Project, with an additional option to let you Copy directives and constraints from solution. In the case where there are already multiple solutions, you can specify which solution to copy from. After the new solution has been created, optimization directives can be added (or modified if they were copied from the previous solution).

When your project has multiple solutions, the commands are generally directed at the current active solution. You can specify the active solution by right-clicking on a solution in the Explorer view, and use the Set Active Solution command. By default, synthesis and simulation commands build the active solution, directives are applied to the active solution, and reports are opened for the active solution. You want to ensure you are working in the correct solution when your project has multiple solutions.

Tip: The Explorer view shows which solution is active by applying a bold-italic font to the solution name.