Enabling Xen Awareness - 2021.2 English

Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)

Document ID
UG1400
ft:locale
English (United States)
Release Date
2021-12-15
Version
2021.2 English

This section describes setting up the Xen aware debug for Zynq UltraScale+ MPSoC devices running Linux from SD card, using the Vitis IDE. It is assumed that the following prerequisites have been satisfied:

  • You have the ZCU102 board running a Xen and Dom-0.
  • You have the Xen symbol file (xen-syms).
For details on how to boot Xen and Dom-0, refer to PetaLinux Tools Documentation: Reference Guide (UG1144).
  1. Launch the Vitis IDE.
  2. Select Window > Open Perspective > Debug.
  3. Select Debug As > Debug Configurations.
  4. In the Debug Configurations page, select Launch on Hardware (Single Application Debug).
  5. Click New ().
  6. Select Attach to running target debug type and click Debug. Debugging begins with the processors in the running state.
  7. Right click Cortex-A53 #0 target and select Symbol Files.
  8. Select the symbol file (xen-syms).
  9. Select the OS awareness checkbox.