Running an Application in Non-Interactive Mode - 2021.2 English

Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)

Document ID
UG1400
ft:locale
English (United States)
Release Date
2021-12-15
Version
2021.2 English

Xilinx® System Debugger Command-line Interface (XSDB) provides a scriptable interface to run applications in non-interactive mode. To run the program in previous example using a script, create a Tcl script (and name it as, for example, test.tcl) with the following commands. The script can be run by passing it as a launch argument to XSDB.

connect -url TCP:xhdbfarmc7:3121

# Select the target whose name starts with Arm and ends with #0. 
# On Zynq, this selects “Arm Cortex-A9 MPCore #0”

targets -set -filter {name =~ "Arm* #0"}
rst
fpga ZC702_HwPlatform/design_1_wrapper.bit
loadhw ZC702_HwPlatform/system.xsa
source ZC702_HwPlatform/ps7_init.tcl
ps7_init
ps7_post_config
dow dhrystone/Debug/dhrystone.elf

# Set a breakpoint at exit

bpadd -addr &exit

# Resume execution and block until the core stops (due to breakpoint) 
# or a timeout of 5 sec is reached

con -block -timeout 5