To explain the card set up, this topic assumes
that you are using CentOS 7.9 on the host and have inserted the Versal VCK5000 card into
the PCIe slot.
- Execute the following command to install Versal card target platform, XRT, and
XRM.
[Host]$ cd Vitis-AI/board_setup/vck5000 [Host]$ source ./install.sh - After the script is executed successfully, manually reboot the
host server
once.
[Host]$ sudo reboot - Use the /opt/xilinx/xrt/bin/xbutil
examine to check that the installation was successful. The
results should appear as follows:
For more information on boards, see Setting up a Versal Accelerator Card.