General Pinout Selection Guidelines - 2023.2 English

Versal Adaptive SoC Board System Design Methodology Guide (UG1506)

Document ID
UG1506
Release Date
2023-11-15
Version
2023.2 English

Following are general guidelines:

  • Group the same interface data, address, and control pins into the same bank. If you cannot group these components into the same bank, group them into adjacent banks.
  • Place the following interface control signals in the middle of the data buses they control: clocking, enables, resets, and strobes.
  • Place very high fanout, design-wide control signals towards the center of the device.