The DC power, USB 3.0, and Ethernet connectors are located on the left
side of the SmartLynq+ Module, as shown in the following figure.
Figure 1. Host-Side Connections
Power to the SmartLynq+ Module is supplied by a 12V / 2A DC module connected to the Power connector. Note that when the DC module is connected to the power connector, the SmartLynq+ Module turns on. The Ethernet connector is always active when the cable is powered. When an ethernet cable is connected to the SmartLynq+ module, the cable initializes the ethernet port and a host can communicate with it by using the IP address shown on the display screen. The USB 3.0 is an alternate host interface that can be used for host communication. The USB 3.0 interface is also active upon power up and initializes on connection to an active USB connection.