Flashing the Images to ZU19 Zynq UltraScale+ MPSoC QSPI Using flash_app - 1.0 English

T1 Telco Accelerator Card Installation Guide (UG1518)

Document ID
Release Date
1.0 English
  1. Ensure that the PCIe PFs for ZU19 Zynq UltraScale+ MPSoC are visible in the lspci command.
  2. Execute ./mpsoc_flash_qspi.sh <MPSOC BOOT.BIN absolute file path> [<QSPI flash offset> [<PCIe BDF>]] inside the flash_app directory.
  3. Wait until the message “Programmed boot image” appears.